A WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB loss. If the cable is connected to an antenna with 9dBi gain, what is the EIRP at the antenna element?
A. 23 dBm
B. 26 dBm
C. 13 dBm
D. 10 dBm
Answer: A
What wireless networking term describes the increase of RF energy in an intentional direction with the use of an antenna?
A. Directed Radiation
B. Active Amplification
C. Passive Gain
D. Beam Digression
Answer: C
Tuesday 3 March 2020
Wednesday 2 October 2019
CWNP CWNA-107 Questions Answers
An RF signal sometimes bends as it passes through some material other than free space. What is the term that describes this behavior?
A. Reflection
B. Refraction
C. Scattering
D. Warping
Answer: B
A. Reflection
B. Refraction
C. Scattering
D. Warping
Answer: B
Monday 20 May 2019
CWNP CWNA-107 Question Answer
What parameter of the client driver should be configured on a Windows computer to optimize moving from one AP to another within the ESS?
A. Band preference
B. Roaming threshold
C. ESSID selection
D. SSID selection
Answer: C
Visit For More Detail CWNA-107 Exam Dumps
A. Band preference
B. Roaming threshold
C. ESSID selection
D. SSID selection
Answer: C
Visit For More Detail CWNA-107 Exam Dumps
Tuesday 27 November 2018
CWNP CWNA-107 Question Answer
When a client station sends a broadcast probe request frame with a wildcard SSID, how do APs respond?
A. For each probe request frame, only one AP may reply with a probe response.
B. Each AP responds in turn after preparing a probe response and winning contention.
C. Each AP checks with the DHCP server to see if it can respond and then acts accordingly.
D. After waiting a SIFS, all APs reply at the same time with a probe response.
Answer: B
A. For each probe request frame, only one AP may reply with a probe response.
B. Each AP responds in turn after preparing a probe response and winning contention.
C. Each AP checks with the DHCP server to see if it can respond and then acts accordingly.
D. After waiting a SIFS, all APs reply at the same time with a probe response.
Answer: B
Monday 15 October 2018
CWNP CWNA-107 Question Answer
What statements about the beamwidth of an RF antenna are true?
A. Horizontal and vertical beamwidth are calculated at the points in which the main lobe decreases power by 3 dB
B. Vertical beamwidth is displayed (in degree) on the antenna’s Azimuth chart.
C. When antenna gain is lower, the beamwidth is also lower in both the horizontal and vertical dimensions.
D. The beamwidth patterns on an antenna polar chart indicate the point at which the RF signal stops propagating.
Answer: A
ABC Company is planning a point-to-multipoint outdoor bridge deployment with standalone (autonomous) 802.11 bridge units. 802.1X/EAP will be used for bridge authentication. A Linux-based RADIUS server will be used for authentication. What device in the bridge Implementation as the 802.1X Authenticator?
A. All non-root bridges
B. The root bridge
C. The Ethernet switch
D. The RADIUS server
Answer: B
A. Horizontal and vertical beamwidth are calculated at the points in which the main lobe decreases power by 3 dB
B. Vertical beamwidth is displayed (in degree) on the antenna’s Azimuth chart.
C. When antenna gain is lower, the beamwidth is also lower in both the horizontal and vertical dimensions.
D. The beamwidth patterns on an antenna polar chart indicate the point at which the RF signal stops propagating.
Answer: A
ABC Company is planning a point-to-multipoint outdoor bridge deployment with standalone (autonomous) 802.11 bridge units. 802.1X/EAP will be used for bridge authentication. A Linux-based RADIUS server will be used for authentication. What device in the bridge Implementation as the 802.1X Authenticator?
A. All non-root bridges
B. The root bridge
C. The Ethernet switch
D. The RADIUS server
Answer: B
Monday 2 July 2018
CWNP CWNA-107 Question Answer
What statement about the SSID is true?
A. The SSID is a security session identifier used in RSNs.
B. The SSID must be included in an association request frame.
C. The SSID is an alphanumeric value assigned to devicemanufacturers by the IEEE.
D. The SSID is a pseudo-random number assigned to each client by an AP.
Answer: D
A. The SSID is a security session identifier used in RSNs.
B. The SSID must be included in an association request frame.
C. The SSID is an alphanumeric value assigned to devicemanufacturers by the IEEE.
D. The SSID is a pseudo-random number assigned to each client by an AP.
Answer: D
Friday 2 March 2018
CWNP CWNA-107 Question Answer
You are reconfiguring an AP to use the short guard Interval. How long will the new guard interval duration be after the change?
A. 400 ns
B. 10 ms
C. 800 ns
D. 104 ms
Answer: A
Your manager asked you to locate a solution that allows for centralized monitoring of WLAN performance over time. He wants a single pane of glass for administration and monitoring of the solution. What do you recommend?
A. AP-based spectrum analysis
B. Laptop based spectrum analyzers
C. Overlay WLAN monitoring solution
D. laptop-based protocol analyzers
Answer: A
A. 400 ns
B. 10 ms
C. 800 ns
D. 104 ms
Answer: A
Your manager asked you to locate a solution that allows for centralized monitoring of WLAN performance over time. He wants a single pane of glass for administration and monitoring of the solution. What do you recommend?
A. AP-based spectrum analysis
B. Laptop based spectrum analyzers
C. Overlay WLAN monitoring solution
D. laptop-based protocol analyzers
Answer: A
Subscribe to:
Posts (Atom)